|
|
Eye Pins
What you'll need:
- About 4cm of 0.7mm wire (sterling silver, gold, copper etc). 0.6mm will work as well, and is good for beads with very small holes.
- Round nose pliers.
- Cutting pliers.
Notes: This is a much cheaper way to obtain eyepins. It is simple and quick.
- Cut the wire to about 4cm (or longer/shorter depending on your design).
- Use your round nose pliers to make a loop at one end. The loop should be approx 3mm in diametre.
- Close it with your pliers, or leave it open and thread a hanging bead on.
- There are endless possibilities!
Other articles you might be interested in:
Simple Earrings
Beads/supplies you might be interested in:
Wire
|
|
